Free Shipping On All Orders Over $50 - (800) 791-6521 - Share The Stoke

DIY Wood Surfboard Kits

SURFBOARDS-WSS-1

Size Guide
Continue Shopping or Checkout

What is a Surfboard Kit?

Wood Surfboard Kit

It's a way for you to make your own surfboard from wood using our modern interpretation of Tom Blake's work  using the perimeter stringer method utilizing laminated rails as stringers, which are connected with a series of plywood ribs.

Sounds a little complicated, but without our 72 page instruction manual, we'll help you each step of the way.

This design style descended from the 1930's Tom Blake paddle-boarding method which favors a central stringer, with individually shaped transverse ribs, covered with a skin and lastly, rails which are then shaped.
This skeleton is subsequently sheathed with thick wood strips, forming a fast hollow board with better flex properties and giving you a sick ride.
Wood Surfboard Kit Wood Surfboard Kit Frame Once you shape it out you need to seal it up with a coat of resin and fiberglass (or bamboo). How cool is that, putting together your own board eco style just like the OG surfers of the past. It's a great project and there is nothing like surfing your own personally made board.

Get the full guide here.

Diy Wood Surfboard Kits

1. Question: What do the kits contain?  Do they have everything I need?

Answer:  The regular kits consist of the ribs and spar pieces that make up the frame.  They also include a full instruction manual that covers every step of the build in detail.  You will need wood for the outside planking as well as glue, fiberglass and shop supplies like sandpaper.  You can buy or build a fin to be glassed on or mounted in a fin box.  If you want a complete kit we have full kits that have everything you need including the wood planking and glassing materials. Check the Surfboard Kits page for details.
 
2. Question: What is the best kind of wood to use?

Answer:  Recycled lumber is the eco-friendly cost effective choice. Reclaimed lumber such as redwood and cedar are an excellent wood choice as they are often already light and dry. If you are going for a light board you will want to use soft woods like redwood, cedar, pine, paulownia, or balsa.  If you don't care about weight, go for exotic hardwoods.  We have used mahogany, ebony, oak and others.  The hardwoods are beautiful and strong but heavy.  

3. Question: What's in an export kit?

Answer:  An Export Kit that contains the same parts as the regular kit but the spar has been cut into approximately 24" pieces.  These pieces are glued together using the backing blocks that come with the kit.  For most kits that means 3 or 4 glue joints.  We have spoken to many users and they say the extra 
work is no problem and there is no loss of strength.  We can ship an export kit anywhere in the world using US Postal Service First Class mail.
 
4. Question: Do I have to glass the board or can I just varnish it?

Answer:  If you are only going to hang the board on a wall simply varnishing it is adequate.  You should always glass a board that is going to be used.  Not only to seal the water out but to give the board the strength it needs.
 
5. Question: What's a vent for, is my board going to explode without one?

Answer:  Explode? No.  But if you leave in the hot sun it can puff up and weaken the inside glue joints.  It can also delaminate
 
6. Question: Where do I buy wood for the planking?

Answer:  Lumber suppliers and home improvement stores are the obvious answer. Most builders love the challenge of finding the perfect wood for their board and they will search through pallets of wood to find the perfect pieces.  We have found beautiful heart redwood being sold for planter edging in the garden department of Home Depot.  Lumber suppliers like Austin Hardwoods will even cut a custom kit for you.  The assembly manual lists a lot of good sources and 
even tells how you can get free wood.  
 
7. Question: Is the assembly a printed copy?

Answer:  No, its a PDF file that you can display on any computer.  It gets emailed to you when your order is processed so you can start planning before your kit even arrives.  You need Adobe Acrobat Reader software that is available for free download at www.adobe.com but chances are its already on your
computer.  
 
8. Question: I've never glassed a board, is it hard?

Answer: The assembly manual outlines the process but if you are not sure  watch some surfboard glassing videos on www.youtube.com.  This will help you see glassed and many tell us it's not as expensive they thought it would be.
 
9. Question: What kind of resin do you use?

Answer:  We think epoxy has an edge over polyester on wood surfboards.  Some builders have reported that Polyester resin will delaminate from certain kinds of wood.  We have had good results with both polyester and epoxy but epoxy is lighter, easier to use, easier to clean up, and has virtually no smell.  
We tell the best epoxy and where to get it in the assembly manual.
 
10. Question: How do I choose the board that's right for me?

Answer:  You choose a wood surfboard the same way you would choose a foam board.  If you want to cruise and maybe get some nose riding in, you want one of our long boards.  If you like to go wild and really shred, one of the fish will do the job.  If you want something in between the long and short
boards the Mini Mal is perfect.  Then there are the Stand Up Paddle boards that will let you cruise standing up in style. Bottom line is that if a certain kind of foam board works for you its wood counterpart will work the same.
 
11. Question: How much woodworking ability do I need and what tools?

Answer:  This is not the easiest project you will ever try, but its probably not as hard as you think.  If you follow the detailed instruction manual you will be fine.  As for tools, a table or band saw is a must.  Also a belt sander and block plane are necessary.  As for a power thickness planer, if you have one that's
great.  Lots of builders have made deals with cabinet shops or local school wood shops to plane the wood for them.

12. Question: Can the kits be modified?

Answer:  You bet!  That's why we call the Chameleon the Chameleon.  If you build it according to plan its an egg.  It can be modified many ways to make it faster and more maneuverable.  The kits can also be narrowed somewhat if desired.  The instruction manual has a complete section on how to modify a
board.  

 

ECO Chamber Mini Simmons5'6" or 9' ECO Chamber Mini Simmons

This board won "Best of Show" in the "Most Sustainable Surfboard" category at The Boardroom International Surf Expo 2012.

It's a planing hull design with parallel rails, twin keel fins, and it literally flies through the water.

Kits are now available for both the 5'6" Mini Simmons and the 9'0" full-size Simmons style board. Both built using "eco chamber" build technology!

See this post for directions on how the eco chamber system works.

In the order menu pick Mini Chambered 5'6" or 9' to Check out.



5'6" FAST LUCY FISH

5'6" FAST LUCY FISH Wood Surfboard Kit"The Fast Lucy" got her name because she's fast and loose! 

She's great in summer surf she'll still crank on head- high days.

If you are making the transition from long-board to short board this is the way to go.

Any number of fins from one to five works.

  • Length: 5’ 6”
  • Width: 21 3/4 in.
  • Nose: 18 1/4 in.
  • Tail: 18 1/4 in.
  • Thickness: 2 1/4 in.

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step.

<meta charset="utf-8" />

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



5'6" FUGU FISH

5'6" FUGU FISH Wood Surfboard Kit"The Fugu Fish" is a high performance fish designed in conjunction with Justin Grover of Liquid Lifestyles in Australia.

Justin loved the Fast Lucy that he built but wanted more performance.

What he and Brad came up with is a lightweight rocket with a dual channeled bottom.

The performance is like a short-board but you still have the benefits of a fish.

  • Length: 5' 6"
  • Width: 20"
  • Nose: 14"
  • Tail: 16 1/2"
  • Thickness: 2 1/2"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step.

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



6' MID FISH

<meta charset="utf-8" />6' MID FISH Wood Surfboard Kit"The Midfish" falls right between the Fast Lucy and Kingfish.

Like its two cousins its still fast, loose and fun – just a little longer to accommodate the bigger riders. I think 6' is a good length for a fish, most I ride are between 5'10" and 6'. It's nice to have a little extra board to paddle into waves and get through flat sections
  • Length: 6’ 0”
  • Width: 24 1/4 in.
  • Nose: 20 1/4 in.
  • Tail: 20 1/4 in
  • Thickness:2 1/2 in.

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step.

<meta charset="utf-8" />

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



6'6" KINGFISH

<meta charset="utf-8" />6'6" KINGFISH"The Kingfish" is our largest WSS fish. It was designed for bigger surfers who still like to rip but has been putting down too many cervesas this year.

Still fast, loose and fun (like those chicks you used to date in high school).

This one is big and fat like your . . . well, why continue.

Like the other fish you can build it with any fin combination.
  • Length: 6’ 6”
  • Width: 25 3/4 in.
  • Nose: 21 1/2 in.
  • Tail: 21 1/2 in.
  • Thickness: 2 3/4 in.

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step.

<meta charset="utf-8" />

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



6'8" The Toad

6'8" The Toad Wood Surfboard Kit"The Toad" with its multi channel bottom profile, is a challenge to build but worth the effort. The channels hold a line and will let you crank turns you won't do on any other wood board. The bottom is planked in the usual way but the contoured ribs let you make perfect channels

  • Length: 6' 8"
  • Width: 25 1/4"
  • Nose: 20"
  • Tail: 18"
  • Thickness: 3"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step.

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.

 



7' Driftwood

7' Driftwood Wood Surfboard Kit"The 7'0" Driftwood" This is the real hot rod of the Driftwood series. It has the speed and agility you expect from a performance hybrid when its built to plan but it can be shortened to 6'6" for an even more radical profile.

Choose the fin setup that's best for your style and harden the rails for snappy turns and an edges that hold tight.

  • Length: 7’
  • Width; 22"
  • Nose: 18 3/4"
  • Tail: 16"
  • Thickness: 3"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



7'6" Chameleon

7'6" Chameleon Wood Surfboard KitThe 7'6" Chameleon is a high performance surfboard, well, let's say it's a long-board that performs like a short-board. when it's built according to plan it's an egg that lets you make the most of any size surf. But you can put your own spin on it and make it much more, sharpen the nose and tail for more speed or maneuverability.

  • Length: 7’6"
  • Width: 23 1/2"
  • Nose: 17 1/4"
  • Tail: 15 1/2"
  • Thickness: 2 3/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



8' Driftwood

8' Driftwood Wood Surfboard Kit"The 8'0" Driftwood" 8-foot performance hybrid. This board has enough volume to easily float riders in the 180 pound neighborhood. Te driftwood is a long-board that thinks its a short-board. Its the nose and tail have been narrowed giving sleek lines and awesome speed and maneuverability. You'll be cranking turns you never thought possible on a long-board.

  • Length: 8’ 0”
  • Width: 22"
  • Nose: 15 3/4"
  • Tail: 16"
  • Thickness: 3"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



8'0" Mini Mal

8'0" Mini Mal Wood Surfboard KitClassic mini Malibu style long-board with its roots in the 60s. Build it with modern rail profile for a great performer or stick with the traditional 50/50 rails for that sweet paddling nostalgic feel.

The Mini Mal is a perfect starter board for the younger surfers but is also fun for the experienced rider and makes a great transitional board.

  • Length: 8’ 0”
  • Width: 24"
  • Nose: 21 3/4"
  • Tail: 15 1/4"
  • Thickness: 2 3/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



8'1" Driftwood Sr.

<meta charset="utf-8" />

8' Driftwood Wood Surfboard Kit"The 8'1" Driftwood Sr." 8-foot performance hybrid that we widened a little for better flotation and stability. Designed for riders in the 200+ pound area.

Same sleek lines and awesome speed and maneuverability as the Driftwood, just floats more. You'll be cranking turns you never thought possible on a long-board.

  • Length: 8’ 1”
  • Width: 24 3/4"
  • Nose: 21 1/4"
  • Tail: 18 1/2"
  • Thickness: 3 1/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



8'6" Chameleon

<meta charset="utf-8" />

7'6" Chameleon Wood Surfboard KitThe 8'6" Chameleon is a high performance surfboard, well, let's say it's a long-board that performs like a short-board. when it's built according to plan it's an egg that lets you make the most of any size surf. But you can put your own spin on it and make it much more, sharpen the nose and tail for more speed or maneuverability.

  • Length: 8’6"
  • Width: 23 1/2"
  • Nose: 17 1/4"
  • Tail: 15 1/2"
  • Thickness: 2 3/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.

 



8'11" Clearwood South Beach

8'11" Clearwood South Beach Wood Surfboard KitDesigned with carving in mind this is a board you can really have fun on! Fun board? You bet!

With the right fin set up this board will improve your surfing like you won't believe! We recommend this board be set up with the Hanalei "thumb" T2 series fin.

This series of fin creates an amazing "pop" out of the turns and we have found nothing like it for positive control while maintaining a fun and loose feel.

  • Length: 8’11
  • Width: 29 1/2"
  • Thickness: 4 1/4"

This Clearwood Kit contains a complete frame consisting of ribs and main spar (stringer). Our innovative "rocker tab" system eliminates the need for a rocker table and assures an accurate rocker profile with every kit.

We encourage the use of plantation grown paulownia wood for "skinning" these boards. With the use of high quality marine plywood for the framework and a paulownia wood skin, a hollow wood board should last many many years if not a lifetime!

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



9'0" The Robert August

9'0" The Robert August Wood Surfboard KitThe Robert August is the board that Robert August uses himself around the world during his surf travels.

This board can do it all from powerful carving 360s off the tail to great nose rides. This board features a moderate width nose with a nose concave underneath for extra lift while nose riding.

60/40 rails let it will paddle nicely and still crank turns at will.

  • Length: 9’ 0”
  • Width: 24"
  • Nose: 21 3/4"
  • Tail: 15 1/4"
  • Thickness: 2 3/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.

 



9'0" Cruiser

9'0" Cruiser Wood Surfboard KitThe 9'0" Cruiser is a slightly shortened and trimmed down version of the Original Cruiser. We took 6" off the length and narrowed the nose 1/4".

You'll get even more performance out of this classic long-board shape.

Its still got just enough rocker to be forgiving on late takeoffs but still has speed down the line. Be prepared to spend some serious nose time with this board.

  • Length: 9’ 0”
  • Width: 22 1/4"
  • Nose: 18 1/4"
  • Tail: 16"
  • Thickness: 3 1/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.

 



9'6" The Robert August

<meta charset="utf-8" />

9'0" The Robert August Wood Surfboard KitThe Robert August is the board that Robert August uses himself around the world during his surf travels. This board can do it all from powerful carving 360s off the tail to great nose rides.

This board features a moderate width nose with a nose concave underneath for extra lift while nose riding.

60/40 rails let it will paddle nicely and still crank turns at will.

  • Length: 9’6”
  • Width: 24"
  • Nose: 21 3/4"
  • Tail: 15 1/4"
  • Thickness: 2 3/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.

 



9'6" Cruiser

<meta charset="utf-8" />

9'0" Cruiser Wood Surfboard KitThe original Curiser was inspired by the great long-boards of the 60s Build it with retro 50-50 rails for that sweet turns on a dime and hugs a wave tight.

Its got just enough rocker to be forgiving on late takeoffs but still has speed down the line.

Be prepared to spend some serious nose time with this board.

  • Length: 9’ 6”
  • Width: 22 1/2"
  • Nose: 18 1/4"
  • Tail: 16"
  • Thickness: 3 1/4"

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



10' Gordo

<meta charset="utf-8" />

7'6" Chameleon Wood Surfboard Kit"The Gordo" is our original "Big Boy Board". . But just because it's big doesn't mean it's clumsy.

The rails have been pinched slightly to give it agility and performance.

  • Length: 10’ 0”
  • Width: 23 3/4"
  • Nose: 19 1/2"
  • Tail: 15"
  • Thickness: 3 3/8 in.

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.

 


 

10'10" Clearwood Checto

10'10" Clearwood Checto Wood Surfboard KitThis "old school" single fin longboard style surf SUP has a very progressive rocker profile and was designed to surf!

Many boards around this length are designed as "all around" boards. This is definitely not the case with the "CHETCO".

Although you CAN paddle the "CHETCO" around your local estuary or lake, this board really is most at home in the surf and is a great longboard style ride.

  • Length: 10' 10"
  • Width: 29"
  • Thickness: 3 3/4"

This Clearwood Kit contains a complete frame consisting of ribs and main spar (stringer). Our innovative "rocker tab" system eliminates the need for a rocker table and assures an accurate rocker profile with every kit.

We encourage the use of plantation grown paulownia wood for "skinning" these boards. With the use of high quality marine plywood for the framework and a paulownia wood skin, a hollow wood board should last many many years if not a lifetime!

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.


11' Malco SUP

11' Malco SUP Wood Surfboard Kit"The Malco 11 foot SUP was designed by Malcolm Schweizer in St. Thomas, Virgin Islands. It has a little concave in the nose and a slight "V" in the tail.

Plus the new rib design lets you build the rails two different ways (built up solid rails or wood strip hollow rails.

  • Length: 11’ 0”
  • Width: 30 3/4"
  • Nose: 23 1/2"
  • Tail: 19"
  • Thickness: 4 1/4" in.

A SUP needs to have good hull speed for "flat-out" paddling but needs to have the ability to plane for surfing. The Malco was designed to achieve both these goals.

You can paddle fast for long distances, but still be able to easily surf once you are there. It is designed with paddling in mind - its not just a big surfboard that comes with a paddle.

This Kit contains a complete frame consisting of ribs and main spar (stringer) as well as an electronic assembly manual covering every step. 

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.

 


 

12' Orca or Lake Superior SUP

12' Orca or Lake Superior SUP Wood Surfboard KitThe "Orca" was designed for stand up paddling which requires maximum flotation and stability. It's at home on a lake or in the surf.

It has a flat bottom and enough rocker that it is at home paddling into a wave.

  • Length: 12"
  • Width: 30 1/4"
  • Nose: 19 3/4"
  • Tail: 17 3/4"
  • Thickness: 4 3/4"

The "Lake Superior" was designed for stand up paddling in lakes and calm water. It has less rocker than its cousin "The Orca" because it doesn't have to contend with waves.

  • Length: 12"
  • Width: 30 1/4"
  • Nose: 19 3/4"
  • Tail: 17 3/4"
  • Thickness: 4 3/4"
<meta charset="utf-8" />

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



12'6" Clearwood Umpqua

12'6" Clearwood Umpqua Wood Surfboard KitThe Umpqua is a fun race board or a very fast touring board. In general the 12'6" class of board is intended for lighter paddlers so if you are over about 170 pounds, then our 14' "CASCADE" is more appropriate for you.

If you "skin" the "UMPQUA" with 1/4" paulownia wood and glass it with one layer of 4oz cloth the finished weight should be about 26 pounds.

  • Length: 12' 6"
  • Width: 27"
  • Thickness: 6" at nose

This Clearwood Kit contains a complete frame consisting of ribs and main spar (stringer). Our innovative "rocker tab" system eliminates the need for a rocker table and assures an accurate rocker profile with every kit.

We encourage the use of plantation grown paulownia wood for "skinning" these boards. With the use of high quality marine plywood for the framework and a paulownia wood skin, a hollow wood board should last many many years if not a lifetime!

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.



14' Clearwood Cascade

14' Clearwood Cascade Wood Surfboard KitThe "CASCADE" for bigger paddlers that need more volume in a board.

This should be another great performer for those that want to have a go a racing a wood board or just having fun touring a fast and beautiful wood SUP.

  • Length: 14'
  • Width: 27"
  • Thickness: 6"+ thick at nose

This Clearwood Kit contains a complete frame consisting of ribs and main spar (stringer). Our innovative "rocker tab" system eliminates the need for a rocker table and assures an accurate rocker profile with every kit.

We encourage the use of plantation grown paulownia wood for "skinning" these boards. With the use of high quality marine plywood for the framework and a paulownia wood skin, a hollow wood board should last many many years if not a lifetime!

You will need wood for the outside planking, fiberglass, glue, sandpaper and common tools to complete the kit.


 

15' & 15' 7" Paddle Cat

15' & 15' 7" Paddle Cat Wood Surfboard Kit

The "Paddle Cat" is our SUPER STABLE stand-up paddle board that allows you to bring along a friend or just chill while you take in the naked girls screaming at you along the beach.

Here are some thing you can do with this rad cat:

  • Paddle the bay of lake while thinking about your life
  • Add a motor and show your friends that you can still drive
  • Add a sail and good to Hawaii and surf the Pipeline
  • Add a cooler and umbrella with lots of cold beer.
  • Also great for fishing or nude sun bathing.

The paddle Cat includes the pieces you need to build the two hulls shown in the picture. The builder must supply the plywood for the platform and dog.

The Paddle 200 has a float capacity of 200 lbs and the Paddle 300 has a float capacity of 350 lbs.

Shipping Guarantee

We process orders in 24-48 hours and boardbags take from 1-5 days to reach you from California (see chart below). If you got a trip coming up and need it faster call us at 800-791-6521 and we'll make it happen. We answer the phone 24/7.

always offer a tracking number on all shipments.

Free Shipping

Lower 48 States (Not Including HI or AL)

Free shipping on all orders over $50 bones.  

Hawaii & Alaska  

We do not offer free shipping to HI & AL, shipments are send USPS priority mail.

  • Small Packages (leash, pads, wax) $15
  • Day Bags $45
  • Travel Bags $100
  • Wheeled Bags $150

Pick-up at Wharehouse in Oxnard, California

Come on by and pick up your order, you must place your order online 24 hrs before you pick it up. 

International Orders

Boardbags cost about $50-$200 to send internationally.  

Surfshop Wholesale Orders Domestic  

Surf Shops are required to pay for shipping, please email us here to place a shop order.  

Eco & Recycled Packaging

We use recycled packing when possible and reuse every vendor box that we are sent. Your box or look like a fourth-grade handy craft (but we always make sure it's well packaged and safe from harm).

We are always looking for ways to improve our carbon footprint and environmental impact.  

See returns and refunds for more information.

Customer Reviews

Based on 2 reviews Write a review
One Year Warranty & Money Back Guarantee

Customer Reviews

Based on 2 reviews Write a review

Category: Wood Surfboards

Type: Unknown Type



Related Items

Wave Tribe Social Proof
Size Chart

Surfboard Leashes

You Break It We Replace It in First Year. 

Buy a leash closest to your board size—i.e. for 6'4 surfboard you need a 6' leash. 

All leashes are 7mm thick, competition leashes which are lighter/thinner 5.5 mm. 

Pioneer Day Boardbags - Fits One Surfboard

All boardbags have +2 inches. Thus a 6'6 board fit's perfectly in a 6'6 boardbag. All Pioneer bags have expandable fin gussets, so you can keep your fins on your board in the bag—or you can roll with glass-on fins.

Pioneer Sizes:

All bags have interior pockets (fins, leash and wax), bags fit industry standards. 

Our 8'6, 9'6 and 10' bags have fin slots and round noses. 

Pioneer bags also have an exterior pocket and zip all the way to the nose.

Travel Bags - Fits Two Surfboards

All Global boardbags have +2 inches, so if you buy a 6'2 boardbag, the real length is 6'4—thus you have a bit of room to play. 

Global Travel Bag Sizes:

Travel boardbags are 6'-8' inches deep to accommodate two boards—though you can travel with one in these bags without a problem—there are two interior pockets for leash, wax, and fins.

Surfboard Travel Bag Pockets Fin Wax Leash

Travel boardbags have two padded boards separators and two pockets for your gear. 

* Travel boardbags also have 13mm + 13mm of extra padding in the nose and tail.

Travel Bags with Wheels - Fits Two Surfboards

New in 2016 is the double travel bag with wheels. Sometimes you want a smaller bag with wheels, now you can have it. All Global boardbags have +2 inches, so if you buy a 6'2 boardbag, the real length is 6'4—thus you have a bit of room to play. 

Global Travel Bag Sizes:

Travel boardbags are 6'-8' inches deep to accommodate two boards—though you can travel with one in these bags without a problem—there are two interior pockets for leash, wax, and fins.

Wave Tribe Wheelie Surfboard Travel Bags

Travel boardbags have two padded boards separators and two pockets for your gear. 

* Travel boardbags also have 13mm + 13mm of extra padding in the nose and tail.

Boardbag Material & Hardware - All Bags

Side A of the bag is made from a strong density Rugged Eco Hemp exterior which is one tough fiber and naturally built to last with high impact padding protection with Rebound Foam Dynamics including open-to-nose technology.

Side B is the reflective (rental-car-roof-side) made from Reflective Energy Shield for "Cooler Surfboard Safeguard" protecting your surfboard from the sun's harmful rays made from an alloy-steel mesh weave.

All Sides are guarded by our Japanese Never-Rust-or-Break Nickel Platted Zippers streamline zipper trails and our trademarked Easy Flow Zip System.